Ranger 2970N2Ranger Communications once again sets the performance and reliability standard for entry level amateur mobile transceivers with the latest generation of our popular RCI-2950DX/70 series of cost effective, multi-mode, high-performance transceivers.
Introducing the new RCI-2950DX & RCI-2970N2. These new models feature microprocessor control of not one but two amateur bands. The new RCI-2950DX, rated at 25W PEP and the RCI-2970N2, rated at 200W PEP are perfect for the recent band openings on 10 and 12 meters. Now you can upgrade your mobile Ham capabilities with a radio that is rich in features and reasonable in cost.
The new models have retained the operating features of its popular predecessors, including programmable repeater offset and capabilities for a CTCSS tone option — great for increasing repeater activity on 10 meters — and receiver scanning for quick search of active frequencies. The units offer three methods of frequency selection, non-volatile memory to store and scan up to ten favorite frequencies, and front panel frequency selector lockout.
RCI-2950DX & 2970N2
10 Mtr: 28.000 - 29.6999 MHz
12 Mtr: 24.8900 - 24.9900 MHz
1 MHz, 100 KHz, 10 KHz, 1 KHz, 100 Hz
USB, LSB, CW, AM, FM
Microprocessor / Phase-Locked-Loop Synthesizer
Operating Temperature Range
-10 ºC to + 50 ºC
RF Output, RX Signal Strength, Modulation, SWR
(LCD Display Indicates Relative Values)
400WDynamic PTT - 6 Pin
Size (W x D x H)
2950DX - 7 3/4 " x 10 3/4 " x 2-3/8"
2970N2 - 7 7/8" x 11 1/8" x 3 1/4"
RF Power Output
RCI-2950DX - 10 Watts RMS: CW / AM / FM
25 Watts: SSB (PEP)
RCI-2970N2 - 100 Watts RMS: CW / AM / FM