sku:Ranger RCI-2950DX

Ranger RCI-2950DX

$285.98

Introducing the new RCI-2950DX & RCI-2970N2. These new models feature microprocessor control of not one but two amateur bands. The new RCI-2950DX, rated at 25W PEP and the RCI-2970N2, rated at 200W PEP are perfect for the recent band openings on 10 and 12 meters. Now you can upgrade your mobile Ham capabilities with a radio that is rich in features and reasonable in cost.

The new models have retained the operating features of its popular predecessors, including programmable repeater offset and capabilities for a CTCSS tone option — great for increasing repeater activity on 10 meters — and receiver scanning for quick search of active frequencies. The units offer three methods of frequency selection, non-volatile memory to store and scan up to ten favorite frequencies, and front panel frequency selector lockout.

In addition, the Series offers an impressive array of design and performance improvements:

—An improved receiver:designed for increased sensitivity and image rejections.

—A double FET balanced mixer:for improved receiver intermodulation rejection.

—New power supply protection:and temperature compensation for improved stability and reliability over wide temperature ranges.

—Surface mount components:for increased resistance to shock and vibration.

—Improved display lighting:for easy reading in a wide range of light conditions.

—Variable Power Outputfrom2 watts to 25 watts (RCI-2950DX)
General
RCI-2950DX & 2970N2
Frequency Range
10 Mtr: 28.000 – 29.6999 MHz
12 Mtr: 24.8900 – 24.9900 MHz
Tuning Steps
1 MHz, 100 KHz, 10 KHz, 1 KHz, 100 Hz
Emission
USB, LSB, CW, AM, FM
Frequency Tolerance
0.005%
Frequency Control
Microprocessor / Phase-Locked-Loop Synthesizer
Frequency Stability
0.001%
Operating Temperature Range
-10 ºC to + 50 ºC
Meter Function
RF Output, RX Signal Strength, Modulation, SWR
(LCD Display Indicates Relative Values)
Antenna Impedance
50 W
Input Voltage
13.8 Vdc
Microphone
400 W Dynamic PTT – 6 Pin
Size (W x D x H)
2950DX – 7 3/4 ” x 10 3/4 ” x 2-3/8″
2970N2 – 7 7/8″ x 11 1/8″ x 3 1/4″
Weight
2950DX – 4 lb 3 oz
2970N2 – 8 lb 3 oz
Shipping Weight
2950DX – 7 lb.
2970N2 – 11 lb

Transmitter

RF Power Output
RCI-2950DX – 10 Watts RMS: CW / AM / FM
25 Watts: SSB (PEP)
RCI-2970N2 – 100 Watts RMS: CW / AM / FM
200 Watts: SSB (PEP)
Current Draw @ Full Power (PEP)
RCI-2950DX – 8 Amps
RCI-2970N2 – 32 Amps
Modes
USB, LSB, CW, AM, FM, PA
CW Keying
Semi break-in
Carrier Suppression
– 50 dB
Spurious Emission
– 50 dB
Antenna Connector
UHF Type, 50 W

Receiver

Sensitivity
AM / CW: 0.5 µV for 10 db SINAD
FM: 0.25 µV for 12 db SINAD
SSB: 0.15 µV for 10 db SINAD
Selectivity
– 55db
Image Rejection Ratio
– 65 db
Audio Output Power
2.5 Watts @ 10% THD into 8 W

1 in stock

Quantity:
Categories: , Condition: New Availability: in stock

Description

Introducing the new RCI-2950DX & RCI-2970N2. These new models feature microprocessor control of not one but two amateur bands. The new RCI-2950DX, rated at 25W PEP and the RCI-2970N2, rated at 200W PEP are perfect for the recent band openings on 10 and 12 meters. Now you can upgrade your mobile Ham capabilities with a radio that is rich in features and reasonable in cost.

The new models have retained the operating features of its popular predecessors, including programmable repeater offset and capabilities for a CTCSS tone option — great for increasing repeater activity on 10 meters — and receiver scanning for quick search of active frequencies. The units offer three methods of frequency selection, non-volatile memory to store and scan up to ten favorite frequencies, and front panel frequency selector lockout.

In addition, the Series offers an impressive array of design and performance improvements:

—An improved receiver:designed for increased sensitivity and image rejections.

—A double FET balanced mixer:for improved receiver intermodulation rejection.

—New power supply protection:and temperature compensation for improved stability and reliability over wide temperature ranges.

—Surface mount components:for increased resistance to shock and vibration.

—Improved display lighting:for easy reading in a wide range of light conditions.

—Variable Power Outputfrom2 watts to 25 watts (RCI-2950DX)
General
RCI-2950DX & 2970N2
Frequency Range
10 Mtr: 28.000 – 29.6999 MHz
12 Mtr: 24.8900 – 24.9900 MHz
Tuning Steps
1 MHz, 100 KHz, 10 KHz, 1 KHz, 100 Hz
Emission
USB, LSB, CW, AM, FM
Frequency Tolerance
0.005%
Frequency Control
Microprocessor / Phase-Locked-Loop Synthesizer
Frequency Stability
0.001%
Operating Temperature Range
-10 ºC to + 50 ºC
Meter Function
RF Output, RX Signal Strength, Modulation, SWR
(LCD Display Indicates Relative Values)
Antenna Impedance
50 W
Input Voltage
13.8 Vdc
Microphone
400 W Dynamic PTT – 6 Pin
Size (W x D x H)
2950DX – 7 3/4 ” x 10 3/4 ” x 2-3/8″
2970N2 – 7 7/8″ x 11 1/8″ x 3 1/4″
Weight
2950DX – 4 lb 3 oz
2970N2 – 8 lb 3 oz
Shipping Weight
2950DX – 7 lb.
2970N2 – 11 lb

Transmitter

RF Power Output
RCI-2950DX – 10 Watts RMS: CW / AM / FM
25 Watts: SSB (PEP)
RCI-2970N2 – 100 Watts RMS: CW / AM / FM
200 Watts: SSB (PEP)
Current Draw @ Full Power (PEP)
RCI-2950DX – 8 Amps
RCI-2970N2 – 32 Amps
Modes
USB, LSB, CW, AM, FM, PA
CW Keying
Semi break-in
Carrier Suppression
– 50 dB
Spurious Emission
– 50 dB
Antenna Connector
UHF Type, 50 W

Receiver

Sensitivity
AM / CW: 0.5 µV for 10 db SINAD
FM: 0.25 µV for 12 db SINAD
SSB: 0.15 µV for 10 db SINAD
Selectivity
– 55db
Image Rejection Ratio
– 65 db
Audio Output Power
2.5 Watts @ 10% THD into 8 W

Additional information

Weight 12.0000 kg
Dimensions 5.0000 x 9.0000 x 7.0000 cm
Condition

New